The purpose of the RS zones is to provide appropriate regulations for the development of single dwelling units that accommodate a variety of lot sizes and residential dwelling types and which promote neighborhood quality, character, and livability. I...
|Floor to Area Ratio (FAR)|
|Notes||The maximum permitted floor area ratios based on the lot area in accordance with Table 131-04J. See page 65.|
|Front minimum||15 feet|
|Interior side note||lot width X 0.08|
|Side note||lot width X 0.1|
|Rear note||(A) The required rear setback is at least the dimension shown in Table 131-04D, except as follows: (i) For lots less than 100 feet in depth, the rear setback is at least 10 percent of the lot depth, but not less than 5 feet; and (ii) For lots greater than 150 feet in depth, the rear setback is at least 10 percent of the lot depth or the dimension shown in Tables 131-04C and 131-04D, whichever is greater. (B) Where a rear yard abuts an alley, one-half of the alley width, but not more than 10 feet, may be counted toward the required rear setback. In no case shall a rear setback using this provision be less than 5 feet on the premises. See Diagram 131-04B.|
As more people settle in the region, new recreation demands will be placed upon the Park responding to new interests, perceptions and values about how to engage the outdoor environment for relaxation and play. The fundamental goal of the Master Plan ...
Overlay zones may modify the provisions of the base zone.
Note: Overlay zones are added upon request. If you would like one added contact us.
Unlock this parcel to download the property's lot line in the following file formats:
Unlock this parcel to download the property's data attributes in the following file formats:
Last updated: August 24, 2018
Looking to further understand the development potential for a property? Have an experienced architect review the municipal code and compile a feasibility study for you. Call (619) 304-0300.
Have a professional drone operator take photos or create fly over videos of this property for you. Most jobs are done within 48-72 hours and cost $175. Contact us to learn more.